Seattle Combined Two-In-One Wash Basin + Toilet
Seattle Combined Two-In-One Wash Basin & Toilet Space-Saving Compact Design (Gloss White) Clever and contemporary, the Seattle Two-In-One Combined Wash Basin boasts a space-saving design, perfect for compact bathrooms or cloakrooms. This toilet with a sink on top has a small projection of 690mm, allowing for as much floor space as possible. When you’re done washing your hands, the water flows directly into the cistern underneath, helping to reduce waste. The unit is manufactured from white gloss ceramic that’s bright and easy to keep clean.
£234.95
CompareDescription
Product Details:
- Size: Height: 820mm, Depth: 670mm, Width: 420mm
- Height of pan: 400mm
- Type: 2-In-1 Cloakroom Basin + Toilet
- Style: Modern
- Shape: Round
- Colour/Finish: White Gloss
- Material: Ceramic
- Tap Holes: 1
- Space-saving solution
- 3 & 6 litre dual flush
- Easy to clean
- Ideal for Small Spaces
- Integrated Basin
- Includes soft-close seat and cover that prevents slamming and noise
- Horizontal outlet
- Basin with no overflow
- From floor to pan waste centre: 180mm
- Cistern designed to accommodate the wastewater from the bathroom sink
- Pan & Cistern:
Tested in accordance with BS EN 997:2018
UKCA / CE Marked
ISO9001:2015 Registered Manufacturer - Basin:
Tested in accordance with BS EN 14688:2015
UKCA / CE Marked
ISO9001:2015 Registered Manufacturer
Note:
When dressing the basin, please ensure that if the tap is located on the right side of the washbasin, the inlet valve must also be located on the right side of the cistern. Conversely, when fitting the tap on the left side of the washbasin, the inlet valve must be located on the left side of the cistern.
The toilet cistern includes 2 x extended tap flexes, which we recommend using with your chosen tap. These flexes provide easier access during basin installation onto the cistern
Tap and waste not included
All measurements are approximate and may vary. Product images are for illustrative purposes only and may differ from the actual product. Please allow a manufacturing tolerance of +/- 5mm.
